steam tube

英 [stiːm tjuːb] 美 [stiːm tuːb]

网络  蒸汽管

化学



双语例句

  1. The probability of steam generator tube rupture ( SGTR) during the operation of a nuclear power plant is high; there were some SGTR incidents happened during operating plants in the world.
    对核电厂来说,蒸汽发生器传热管破裂(SGTR)事故发生的概率比较高,世界上现有核电厂发生过此类事件。
  2. And that could be pipe breaks maybe in the secondary system, maybe a steam generator tube leak and so forth.
    那可能是管道泄漏,可能是在次级系统中,可能一个蒸汽发生器的管道裂开了等等。
  3. The calculation method of some important parameters, such as the heat transfer coefficient, dead time and so on of the closed steam tube rotary dryers was proposed.
    提出了密闭型蒸气管回转干燥机传热系数及停留时间等主要工艺参数的计算方法。
  4. Application of rotary steam tube dryer in drying of lead concentrates
    蒸汽管回转干燥机在铅精矿干燥中的应用
  5. An inner hollow cavity of the semicircle arc plate of the utility model is comprising of a steam tube, with advantages of saving material and installment column, and low cost.
    本实用新型的半圆弧形板的内空腔构成蒸气管路,节省材料和安装体积,成本较低。
  6. It vertical or horizontal installation, usually oil, steam or tube type or belt type electric heaters heating.
    它垂直或水平安装,通常用油、蒸汽或筒式或带式电热器加热。
  7. Cause Analysis of Steam Boiler Tube Burst and Preventive Measures
    蒸汽锅炉爆管事故原因分析与预防措施
  8. Application of Magnetic Memory Testing to Butt Weld of Guide Steam Tube
    磁记忆检测技术在导汽管对接焊缝中的应用
  9. The new martensite heat-resistant steel P92 by its remarkable anti-high temperature creep strength behavior, as candidate alloys for supercritical plants as the main steam tube.
    新型马氏体耐热钢P92钢以其卓越的抗高温蠕变性能,成为超超临界火力发电机组的主蒸汽管道用材。
  10. You could break a steam generator tube, you could break an instrument line and you could have a spectrum of pipe breaks in a BWR inside of containment.
    你们可能使一个蒸汽发生器的管道破裂,也可能使一个仪器的线断裂,可能会得到管道破裂的光谱,在沸水式反应堆容器的里面。
  11. Corrosion Failure Analysis of the Oxide Rotary Steam Tube Dryer in a PTA Plant
    PTA装置氧化回转蒸汽列管干燥机腐蚀失效分析
  12. Analysis of Explosion of Low-pressure Steam Tube
    低压蒸汽管道爆管分析
  13. Both event tree analysis ( ETA) and deterministic analysis methods are applied to constructing the dynamic analysis model for the steam generator tube ruptures ( SGTR).
    综合应用事件树分析和确定论分析方法,建立船用蒸汽发生器传热管破损事故动态分析模型;
  14. Analysis of the crack cause on steam suction tube in rectification column of acetaldehyde plant
    乙醛装置精馏塔内蒸汽入口管裂纹产生的原因分析
  15. Analysis on the Cause of Leak in Welding Line in Steam Tube and Its Improvement
    蒸汽管线焊缝泄露原因分析及改进措施
  16. In order to judge the cracks 'characters and the influencing factors of steam generator tubes, electron metallographic analysis of cracks of a certain steam generator tube was made by electron microscope.
    为了判断某蒸汽发生器传热管的开裂性质和影响因素,用电子显微镜对该蒸汽发生器传热管管束裂纹进行断口电子金相分析。
  17. The seismic response analysis and experimental study of a model PWR steam generator tube bundle has been completed.
    完成了压水堆蒸汽发生器管束模拟体的地震响应水分析和试验研究。
  18. Discussion on Cancelling the Main Steam Round Tube Constant Drainage of the Former Soviet Union 670t/ h Boiler
    苏联巨变后的国际形势取消前苏制670t/h锅炉主汽环管经常疏水的探讨
  19. Safety Analysis of Steam Generator Tube Leakage in a Liquid-Cooled Reactor
    蒸汽发生器管子漏泄安全分析
  20. Seismic analysis and test of model steam generator tube bundle
    蒸汽发生器模拟管束的地震响应分析和试验
  21. The results of preliminary analysis of design basic accidents, such as reactivity insertion accidents, loss of primary coolant mass flow, primary system depressurization and rupture of steam generator tube are presented and discussed.
    介绍与讨论了部分设计基准事故的分析结果,包括反应性引入事故、丧失主热阱事故、主回路失压事故,以及蒸汽发生器断管事故等。
  22. In this paper, the importance of safety analysis for steam generator tube rupture ( SGTR) of Marine Nuclear Power Plant ( MNPP) is discussed.
    本文论述了船用核动力装置蒸汽发生器传热管断裂事故(SGTR)安全分析的重要性。
  23. Cracking failure analysis on the superheated steam tube
    蒸汽过热器管断裂失效分析
  24. On-line Leakage Examination of Steam Condenser Tube in Power Plant
    电厂凝汽器管泄漏的在线检测
  25. Stress corrosion cracking of steam generator tube and primary pipe in PWR type nuclear power plants
    PWR核电站蒸汽发生器传热管和主管道的应力腐蚀破裂研究
  26. The two kind of steam heating conditions were simulated by using FLUENT software. Flow feature in the steam tube was grasped, flow rate and pressure distribution of each tube in different conditions were obtained.
    通过Fluent软件对其两种蒸汽加热工况进行数值模拟,掌握流体在加热管中的流动特点,得到不同工况下每根蒸汽管中的流量、压力分布情况。
  27. The structure and operate parameter of the rotary steam tube dryer have been optimized in using the optimize model.
    利用该模型,对大型蒸汽列管回转干燥机的结构和操作参数进行了优化。
  28. The large steam rotary tube dryer is one of the most important equipment, which produces the semi-finished products of PTA. Its capability and quality can directly affect the final products 'quality.
    大型蒸汽列管回转干燥机是生产PTA半成品和最终产品的重要设备之一,其性能及运行状况直接影响到PTA最终产品质量。
  29. In this paper, the simulation of a fine hole in a steam generator tube wall was carried out. The ECT probe is of a pair of difference bobbin coils.
    本文对蒸汽发生管道涡流检测中的细孔状缺陷进行了模拟,涡流探头为一对差动式Bobbin线圈。
  30. The original purpose is to reduce the diameter of Guide Steam tube, to simplify the structure and reduce the pressure drop of system, then to uniform flow distribution.
    其本意为减小导汽管直径,简化系统布置,减小系统压降,增强并联管组流量分配的均匀性。